Evaporators

Multiple Effect Evaporator Plant

In case of multiple-effect evaporation plants, the exhaust vapors from the product are used to heat the downstream-arranged evaporation effect so that the steam consumption will be reduced accordingly.

ATFD

Agitated Thin Film Dryer is used to dry a solution of high TDS Water or Products. The outlet of ATFD will be in the Powder form having 10-15% moisture. This system will evaporate the solution by thin layer formation on the Surface.

ATFD is stands for evaporation of water/solvents to make concentrated liquid to dry power or flakes. Based on application either recover solvent or dry product in important.

ATFD is the ideal apparatus for continuous processing of concentrated material to dry solids. ATFD is consist of cylindrical, vertical body with heating jacket and a rotor inside of the shell which is equipped with rows and pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin flim over the heated wall.

The turbulance increase as the product passes through the clearance before entering calming zone situated behind the blades as the heat will transfer from jacket to main shell the under the smooth agitation water/solvent will evaporate and liquid will convert to slurry, to cake or to dry power or flex.

The vapors produced rise upward, counter- curruentlyto the liquid and pass through Cyclone separator mounted of vapor outlet of ATFD.

Further these vapor will be condensed in condenser and recovered as condesate. System will be Operated under vacuum for temperature sensitive products and atmospheric condition for normal drying.

Distillation Plants

Distillation is a process of separating the component or substances from a liquid mixture by selective evaporation and condensation. Distillation may result in essentially complete separation (nearly pure components), or it may be a partial separation that increases the concentration of selected components of the mixture. In either case the process exploits differences in the volatility of the mixture's components. In industrial chemistry, distillation is a unit operation of practically universal importance, but it is a physical separation process and not a chemical reaction.

Stripper System

Stripper System is used to remove low boiler Solvents from Process Fluid. In Waste water application, Stripper column can be used to remove COD percentage from the Effluent. It will recover 90 percentage of low boilers from waste water Effluent. This system can also be used to recover pure solvent from process fluid.

Crystallizer System

Crystallization is used for the production, purification and recovery of solids. Crystalline products have an attractive appearance, are free flowing, and easily handled and packaged. The Process is used in a wide range of industries: from the small-scale production of specialized chemicals, such as pharmaceutical products, to the tonnage production of products such as sugar, common salt and fertilizers.

Vacuum System & Vacuum Ejectors

Steam jet ejectors offer a simple, reliable, low-cost way to produce vacuum. They are especially effective in the chemical industry where an on-site supply of the high-pressure motive gas is available.

Vacuum Pumps

A vacuum pump is a device that removes gas molecules from a sealed volume in order to leave behind a partial vacuum. Vacuum pumps are used in many industrial and scientific processes including composite plastic moulding processes, production of most types of electric lamps, vacuum tubes, and CRTs where the device is either left evacuated or re-filled with a specific gas or gas mixture, semiconductor processing, notably ion implantation, dry etch and PVD, ALD, PECVD and CVD deposition and so on in photolithography, electron microscopy, medical processes that require suction, uranium enrichment, medical applications such as radiotherapy, radiosurgery and radiopharmacy, analytical instrumentation to analyse gas, liquid, solid, surface and bio materials, mass spectrometers to create a high vacuum between the ion source and the detector, vacuum coating on glass, metal and plastics for decoration, for durability and for energy saving, such as low-emissivity glass, hard coating for engine components, ophthalmic coating, milking machines and other equipment in dairy sheds, vacuum impregnation of porous products such as wood or electric motor windings, air conditioning service, trash compactor, vacuum engineering, sewage systems, freeze drying, and fusion research.

Process Pumps & High Pressure Pumps

Heat Exchangers & Condensers Scrubber System

Deformer

Anti Scaling Chemical / De Scaling Chemical​


TOP